- Click on System -> Administration -> Network
- A Network Setting box will appear
- Click on Modem connection button.
- Click on Properties button.
- A ppp0 Properties message box
Type of User | Phone Number |
Regular User | 604-638-0189 |
Community Group | 604-638-0195 |
Alternate Number | 604-638-1365 |
- Check Enable this connection
- In the Phone number box, put the 10 digit number without hyphens
- Type in your username in the username box
- Type in your password in the password box
- Click on the Modem tab
- Select your Modem port
- Select Volume to Low
- Click on the Options tab
- Check “Set modem as default route to Internet”.
- Check “Use the Internet service provider nameservers”.
- Check “Retry if the connection breaks or fails to start”.
- Click Ok button
- Click Close button to exit
- Connecting to VCN dial-up service
- Click on System -> Administration -> Network
- Check the check box beside Modem connection to start connection.
- You will now hear the modem dialing if set up properly.
- After the modem’s sound stops, click close button to close window.
- Now you can start using Internet!
- Disconnecting to VCN dial-up service.
- Click on System -> Administration -> Network
- Uncheck the check box beside Modem connection to stop connection.
- Click close button to close window and you are now disconnected.